T-28 ‘FOAMY’         

Mini LED Nav Lights

 

‘Foamies’ are a blast from sun-up to sundown!  But, why stop at sundown?  How ‘bout experiencing the fun and thrills of night flying?

 

 

 

Convert your Foamy to a 24-hour mission capable flyer with ERC’s custom T-28 ‘Foamy’ LED Mini Nav system.  Although custom designed for Park Zone’s popular 44” T-28 Trojan ‘Foamy’, the kit is versatile and will easily adapt to any aircraft up to a 60” span.  The T-28 system features 5 cutting edge ultra bright 5mm LEDs that will light up your ‘foamy’ like a Christmas tree.  It consists of red and green wing Marker lights, a 50ft. beam Landing light with chromed reflector, white Tail light either solid glowing or flashing (your choice) and a red  Belly Strobe that slowly ‘ramps’ up to full intensity, quickly fades and re-sequences for a very realistic Marz Light beacon effect.  Flashing circuits feature user programmable dual adjustments for Rate (flash speed) and Duty-Cycle (LED on vs. off timing).

  

 

All LEDs are pre-wired on 32 AWG micro wires that become virtually invisible at a short distance.  Installation is a breeze.  Choose from a quick install with wires taped to the outside or go for the clean ‘scale’ install with all wires hidden from view.  Just follow the step-by-step series of install pix.  Extra wire and shrink tubing is included.  Special LED lens caps make for a great looking finish as well as scatter the narrow beam of an ultra-bright 180 degrees for all around visibility which is 100 + yards daytime and 3,000 + yards nighttime!

 

 

 

No Charge:  (Choose preference when ordering)

 

1. White Tail Light – solid Glowing or Flashing
2. Red Tail Light – Solid Glowing or Flashing
3. Belly Strobe – Red ‘Ramping’ or Strobing Style

Extra Charge: T-28 II ‘Foamy’ (larger case & expandable to 50 LEDs)

 

1. AC Strobes – Anti Collision white wingtip strobes, user programmable for
   Rate & Duty Cycle.
2. Additional LEDs - 5 colors to choose from and pre-wired to your specs.
3. Connectors - 1 set of 3m/f for quick disconnect of wings and cowl.
4. Connectors – 1 set of 5 m/f for quick disconnect of all LEDs.

  

 

Special Acknowledgments:  The custom T-28 ‘Foamy’ kit idea originated from the collaborative efforts of avid RC jocks Dave Bottita and the owner of Sin City Jets, Chad Russell.  Thanks guys for your ideas and help with product development.  You can visit Chad’s Jet biz at  www.sincityjets.com.  Lots of great stuff for the RC Jet community and other RC enthusiasts.

A special thanks goes to another good guy RC jock, Michael Nicholas.  Mike not only gave us additional ideas and input but also took the time to shoot the series of meticulous installation pix to help others achieve a super clean install for a great looking ‘scale’ appearance.  Click here for the ‘scale’ install.

 

 

Since we're reconstructing our web site please call 1.888.567.2862 or 530.873.6230, fax 530.873.4729 or email info@electrotekrc.com.  for pricing and other information 

Please put T-38 Questions in the subject line. . .

 

 

 

The SMD microchip controller is small, lightweight, ABS protected, water, fuel, shock and vibration proof.  Rugged to the point that if breaks, even from a crash, it’s replaced under the Lifetime Warranty.  Amazingly, although incredibly brilliant, the system current drain is so slight that the difference in flying time is almost imperceptible.

 

 

Config  Options

TMX Kar-Lites

Description & Overview

 

 

The TMX Kar-Lites is a uniquely crafted LED vehicle scale lighting kit designed for today’s scale On and Off road nitro/gas and electric cars and trucks.   Compact and full of features, its rugged design is able to withstand tremendous abuse and operate trouble free in all environmental conditions.   The heart of the system is enclosed within a high impact ABS case and protected from problems caused by dirt, mud, moisture/water, nitro fuel and gas.   Its modular design allows an RC’er to buy the controller, lights and accessories separately or together as a kit.   One controller can be used to operate several lighted body shells, if desired.

 

The Master Control unit (MCU) has 9 lighting inputs that will handle over 3 dozen mega brite LEDs.   The six main lighting inputs are Tx remote switchable.   Two other inputs are Aux. power type to supply direct plug in LED harnesses or Accessory modules with continuous power.   A third Aux. power input is also TX remote switchable.   There are five built in circuitry options available.   The first is a mercury switch that during deceleration simulates brake lights by intensifying the taillights by a factor or 3 x +.   The second is an Infra Red switch that automatically turns main lights (except brake lights) on/off according to the ambient light conditions for which it is easily user programmed.   Example: if the sun becomes temporarily blocked by a cloud, the lights switch on and then off when it passes by.   At dusk, the lights switch on automatically.   The IR switch can also be adjusted for continuous ‘on’.   The other options are Power & Electronic systems monitoring, Low Fuel monitoring or all three.   The MCU label clearly identifies all inputs by category and function.   Main Lights:   Head, Tail & fog.   Aux Lights:   Additional Head, Tail, Fog, Running Lights for trucks and Undercarriage Lights.   Several accessories are available:   KC Lights, Emergency Stobe(s), Police Lights, Interior Lights, Turn Signals, Sonic Back-up Lights, Parking Lights and Siren.   These are optional modules that plug into inputs labeled “AC” (accessories).

 

The system operates on a voltage range from 4 to 10 volts.   Since LEDs only use 1/10^th, the power of incandescent bulbs, the MCU can be plugged directly into any spare RX slot or use a ‘Y” adapter to plug into a used slot and barely change drive time duration.   LEDs are far more rugged than regular filament bulbs and will withstand a lot of abuse and burn cool for 100,000 hours plus.  

 

The kit comes prewired for practically ‘plug & play’ drop in operation and includes a hardware package for mods, if necessary.   Included for headlamps are chromed metal reflector LED holders and colored lens cap LED holders for other lights.   Remote TX operation requires an optional E-Switch that plugs into switchable circuit inputs.   The master controller is Lifetime Warranted.  

 

All lights are #10 bin (highest quality) State of The Art Mega Bright 5mm round LEDs and have a visibility of 500+ ft daylight and 3,000 yards nighttime.   The headlights cast a 50+ ft beam of pure blue/white light.  

 

 

 

 

17 Cool Features:

 

• Cutting Edge Mega Bright
• 8 Function Power/Electronic Monitoring
• Expandable to 3 dozen + LEDs
• ABS Protected Controller
• 3 Aux Power Accessory Inputs
• Nitro/Gas/Electric Compatible
• Shock Vibration Proof
• Water & Fuel Resistant
• Plug in Harnesses for easy body removal
• Pre Wired for easy Plug & Play install
• Chromed Reflectors & LED light dispersing Lens Caps
• Removable Controller for controlling other lighted body shells
• Built in Action Brake Lights
• Tx Remote Switchable
• Automatic Infra-red On/Off Switching
• Visibility: 200 yards day, 3,000yards night
• Lifetime MCU Warranty  

 

 

Whether used for kicks or scale competition, the TMX Kar-Lites system adds an extra dimension of fun and realism as well as extends driving time into darkness.

Also available are Micro-Lights kits for small vehicles and Mini-Lights kits for economy minded RC’ers that just want to light up a vehicle and don’t care about all the features and options of the full scale kits.    

 

 Please call for Special Introductry Pricing  888.567.2862 or email orders@electrotekrc.com

---

 

  ERC Kar-Lites

Mini & Micro 
 Description & Overview

 The TMX Mini Kar-Lites kit is a miniature uniquely rugged scale lighting system designed to meet the most abusive demands of today’s on and off RC Vehicles. It will easily survive dirt & hard surface crashes and grueling competition racing. Its solid-state components are internally potted and sealed which allow you to run it through dirt, mud, snow and rain. Its module is immune to severe vibration, shock and all nitro and gas fuels.

 The cutting edge LEDs are amazingly brilliant and daylight visible for well over 100 yards and over 3,000 yards nighttime. Operating over a 4 – 10v range the current drawn is so slight it can be plugged directly into or Y’d into any Rx slot without a noticeable change in running time.

 The Mini-Lights module incorporates an exclusive and unique feature. A micro motion sensor that senses deceleration and intensifies the taillights by a factor of 3X plus, i.e. automatic brake light simulation. The main advantage is it does not have to hook up to any other special device. Which means it can be used for both fuel and electric vehicles.

 Another feature is the On/Off switch input that allows you to manually or remotely control the light with an E-Switch (electronic). Lights can be controlled from the Tx. If you prefer, automatically control the lights with ERC’s exclusive infrared switch that senses ambient light. It is user programmable for any lighting condition.

 Installation is a breeze. The modules’ so compact that it can be tucked away most anywhere and stuck on by hook & loop tape.

 The module has 3 plug-in style inputs. Headlights, taillights and an auxiliary light input commonly used for fog lights. If preferred, plug in undercarriage or a string of 4-12 running lights. Two advantages of the plug-in design are . . . easy body removal and also one Master Control unit (MCU module) can be used to control many other pre-lit vehicles. Just purchase the individual LED Harnesses you need for other bodies and put a piece of hook & loop tape somewhere and then simply “plug & stick” to MCU to whatever vehicle, whenever. Single LED, paired LED or string LED Harnesses are packaged and sold individually.

TMX Mini Kar-Lites can be purchased as a kit with 4-6 prewired light assemblies included or module and prewired lights bought separately. Two sizes of LED’s are available. 5mm Mini Lights or 3mm Micro-Lites

 Pre-wired headlights include chromed metal LED reflector type holders. While all other LED assemblies include appropriately colored lens cap LED holders.

All TMX Kar-Lites kits and accessories are proudly made in the U.S.A., Lifetime Warranted and Satisfaction Guaranteed.

Features:

 Compact SolidState Design                           Shock / Vibration Proof
Plug in Light Design                                       Dirt/Mud/Snow Proof
Daylight Visible LEDs                                     Fuel, Water, Moisture Proof
*Manually or Remote Switchable                     Easy Install & Removal
Automatic On/Off Switchable                          1 MCU Will Control any Pre-lit Bodies
 4 – 10v Operational Range                             LED Lens Caps/Chrome Reflectors

                   Master Control Unit                                                               Paired LED Assemblies
                             (MCU)                                                                                   On 16” Leads

                                                 

                          $19.98                                                                Head                 Tail                Fog
                Model shown includes:                                                  $8.00                   $6.00          $6.00
               Action Brake Lights Switch 
               External Switching Input

 

     Call 888.567.2862 or email   orders@electrotekrc.com

 Special Introductry Pricing

 

 

---

MONITORS

LXS 21 & LVS 32

 

OVERVIEW

FEATURES:  

 

What is it?   A user programmable micro processor based voltage supervisor

 

Lithium chemistry power packs have created a revolution in electric flight.  Their advantages have exceeded expectations and opened up a whole new world of R/C flight experience.  But, unfortunately they also have their drawbacks.  They're considerably more expensive then NiCd and NiMH packs and unforgiving if treated carelessly - improper charging technique over discharging, etc.  One of the main disadvantages is their discharge curve.  Unlike NiCd or NiMH packs it's extremely short and doesn't allow much room for mistakes.  So, when we take to the sky one thing we must do is carefully time each flight.  However, since flying patterns, styles and maneuvers usually vary from flight to flight, there's a lot of guesswork involved along with a certain amount of worry for fear of an aircraft suddenly losing enough power for safe return.  Particularly Heli's which will just 'drop out of the sky' like a rock.  For those who want to just have fun flying and not risk their aircraft and expensive LiPo pack to chance - the simple solution is an onboard LiPo pack supervisor that does everything for you - inexpensively and AUTOMATICALLY.        

 

Where to Install

 

To install all you need is a light duty soldering pencil and a minimal amount of soldering skill.  The unit is designed to watch the entire pack voltage drop under real time load, not the regulated voltage to the Rx.  So, it must be hardwired directly to the ESC side of the pack's plug or the ECS's PCB battery lead-in connection point.  Just make sure polarity is correct Red (+) to Red - Black (-) to Black.  Following this method the unit will be deactivated when the plug is disconnected.

 

How Does It Work?

 

A cutting edge technology Ultra Bright LED is used to provide visual warning for several hundred feet in the daylight.  You can also choose a model with an audible sounder, which can be heard on a fly-by, if you prefer.  When you plug in the pack a brief flash (and chirp) alerts that the device has been enabled.  At this point the device is on active standby.  The indicator(s) remain off drawing only micro amp current until the pack reaches a user programmed trip point.  We suggest a minimum of 3.5v per cell which provides about 20-30 sec. warning depending on how hard you push the flight.  For more warning time set the trip point at 3.6v per cell.  Because the device is supervising loaded voltage and load depends on how hard the aircraft is pushed . . . load will vary during the flight.  You may get a brief warning during a particularly heavy load maneuver.  This lets you know you're nearing the programmed threshold.  When the warning is sustained it's time to bring it in. 

 

Is This Prodct Really Necessary?

 

This question is self evident.  For more flying fun and safety, yes!   However, let's briefly recap all the benefits:

 

·      Eliminates the need for inaccurate flight timing. 

·      Eliminates guesswork

·       Eliminates worry

·    Provides aircraft and LiPo packs a much higher degree of safety for more flying fun and enjoyment.

·      Eliminates pack 'drop-out' without warning

·     Will save you big bucks in terms of LiPo pack replacement, spare parts replacement and repairs. 

·      Prevents destroying the pack by over-discharging because you accidentally left pack plugged in

 

 

 

• LXS 21  (4-16v max)  /  LVS 32  (4-32v max)  User programmable voltage range
• 3 models, 5 colors available.  Emerald Green has best daylight visual range - 22,000 mcd
• Small & Lightweight
• Rugged & Durable
• Daylight Visible LED Indicator
• Shock & Vibration Proof
• Water & Fuel Resistant
• Gold Pin Universal Connector
• Drop-in &  Play' Operation
• Compatible with all R/C Systems & Frequencies 
• Uses Onboard System for `Actual' Load Monitoring
• Limited Lifetime Warranty
• Optional Audible Alert Available

 

PRIMARY FUNCTIONS

1. Voltage Supervising

2. `Real Time' Load Monitoring

3. Rx Left `ON' Warning

4. Cell Failure Warning

5. Warns prior to pack drop-out so full operational control of model is maintained for safe return. 

MODEL DESCRIPTION

 

Model I	Standard		Buy  4 Get 1 Free
(buy now)		LED is permanently mounted to side of module.
Model II	Remote		Buy  4 Get 1 Free
(buy now)		LED is affixed to 7" wire lead for more versatile positioning
MODEL III	Twin-Lites
(buy now)		2 LED's like colored are affixed to separate 7†wire leads and work in tandem. The advantage is that the LED's warning can be seen immediately regardless of models orientation

 

 

---

The LXS 21 and LVS 32  are precision micro-processor based instruments designed specifically for R/C models powered by Lithium Polymer (Li-Poly) or Lithium Ion (LI-Ion) technology battery packs.  Their primary purpose is to provide a visual [and if desired audible] warning of a low battery condition which can destroy expensive Lithium packs.  Also provides early warning before Lithium pack 'drop-out' so full control of model can be maintained for safe retrieval and re-charge. 

The LXS 21   (16v Max.)  and LVS 32  (32v Max.)  are manufactured to mil spec standards using state of the art IC chips and surface mount components which makes them very rugged, highly reliable and very accurate. The visual warning is provided by cutting edge Ultra-Brite LED technology.  A 3/8" square 85 db or 105 db (for larger aircraft) audible sound device available as an option, if desired.
 

 

GEM 2000 "Electronic Guardian"

The GEM 2000 (G2K) is far more than a battery monitor. It's a versatile, uniquely designed "real-time" early warning trouble shooting instrument that detects/alerts users to problems and potential failures for the seven most common onboard failure points. Also, on/off status.

 

 

                    

 

1.	Battery Pack	Monitors pack under real-time load conditions, warns of low voltage weak (more info) cells, bad cells etc.
2.	Servos	Checks for internal servo faults
3.	Switch Harness	Checks for current flow problems, connection points and continuity.
4.	Receiver	Checks for component faults "point-to-point contacts" cold joints "conductive metal freebees."
5.	RFI Filtering	Checks RFI "noise" rejection circuitry (ceramic filters)
6.	Freq Crystal	Checks for xtal breaks and spring clip loosening.
7.	Tuning Circuit	Auto range check, Warns of range problems due to Tx/Rx alignment, coil (more info) Separationâ€"core breaks.
8.	Status Indicator	Indicates Rx on/off status.

 

---

CALIBRATION

The G2K's low voltage "trip point" is user-adjustable and has a 4.8 - 10v adjusting range. For convenience it comes preset and labeled for 4.8v, 6v, 7.2v and 7.4v packs.

Regulated Power Packs

INSTALLATION

Note: Avoid mounting G2K and its power lead in close proximity to the Rx and its antenna wire.

---

FEATURES

• Automatic and continual operation when Rx is "on"
• Daylight visible led indicator available in 5 colors
• Low power consumption
• Compact and lightweight
• Rugged solid state circuitry
• Built to mil specs with precision components for reliability and accuracy
• Shock and Vibration proof
• Fuel and water resistant
• Universal gold pin connector (fits most all popular radio systems)
• Lifetime warranty
• Satisfaction guarantee
• 4 models to choose from

---

ALTERNATE CASING

Although the G2K is enclosed in a break-resistant ABS plastic case and weighs only 8.4 grams, it is also encapsulated in shrink-wrapped versions which reduces it to 5.6 grams (.2) oz. for very small models where every gram saved my be important.

Warning indications and trouble shooting

 

---

 

GEM 2000 MODEL DESCRIPTIONS

---

LED COLORS

LED's are identified by colored gemstones

• Red - Ruby   16,000 mcd       
• Green - Emerald  22,000 mcd ( daylight long range visibility)  
• Blue - Sapphire    5,700 mcd  
• Amber- Amber   5,000 mcd  
• White - Diamond    18,000 mcd

---

ORDERING CODE

When ordering the G2K models the SKU is identified by:

---

S.O.S. ALERT
Lost Aircraft Locator

The S.O.S Alert is designed to enable a modeler to quickly locate a downed aircraft in rough terrain via a loud audible alert signal. It's rugged compact SMT design consists of an IC timer chip, case mounted arm button. A remote 87db piezo sounder and 9v battery cap with an inline on/off micro toggle switch. Since Rx batter packs often disconnect on 'impact' an independent 9v battery is a major advantage. Operation is simple. After the pre-flight check turn S.O.S. power switch on and you will hear an audible signal. Push auto timing button to enable 17-19 minute time out. Steady, continuous piercing signal can be heard from at least 100ft away . Easy 5 minute installation "Lifetime Warranty"

---

MULTI - SYSTEM

The Multi-System unit designed to independently monitor several isolated onboard receivers and/or battery packs. It provides all the functions of the GEM 2000 (G2K) in one convenient case which saves space and eliminates the need for multiple modules. Each monitoring circuit is completely isolated having its own individual power lead and LED warning indicator. LEDs may all be the same color or mixed colors and are on 7" extensions. Extensions may be shortened or lengthened if necessary. All voltage presets may be the same or mixed. There are 3 models to choose from.

---

LOW FUEL WARNING

LFI ALERT

The LFI alert is a simple effective unit designed to warn of in-flight low fuel condition. A single lead extends from the units case and terminates in 2 insulated fuel probes that are inserted into any size fuel tank through pressure seals. If probes are installed on the tank top, the fuel level warning is adjustable. One probe pushes to the bottom, the other to the desired warning level. The LFI sense the resistance of the fuel via contact with both probes which is dedicated by the LED flashing quickly at about 5 - 6 pulses per second. When fuel is absent the flash rate instantly drops to 1 pulse per second. Probes are insulated to prevent false indications from ordinary fuel sloshing. Warns for all blends of 'nitro fuel'. Fuel probes cone in several lengths and the probe lead is 15" standard but may be shortened or lengthened.

LFI SERIES

Same as LFI alert but also includes all of the G2K monitoring features for power and electronics monitoring.

Both models are afforded in all 4 of the G2K versions 'Standard' - 'Remote' - 'Twin-Lites' and 'Tip-Lites'. Pressure seals should be replace annually to maintain leak proof seal.

---

PLX - PILOT-LITE

What RC'er hasn't left the Rx switch on accidentally, went to fly only to find a deap pack?  Never Again!

The Pilot-Lite plugs or 'Y's" into any Rx slot.  A quick glance from up to 100ft lets you know pack on/off status via a solid glowing or flashing LED.  chose from 5 diffenent solid glowing LED's or flashing Ruby Red.  Very easy install - drill 1/4" hole in any visible surface location, insert LED clip and snap in LED.  Comes with 6" lead with universal plug or choose any length desired.  current draw is not enough to notice with any pack voltage.  Compatible with all Radio Systems and battery chemistries.  Comes with a Lifetime Warranty. 

 

---

SWITCHES

'SuperRocker'

The 'SuperRocker' is a Lifetime - No Fail heavy duty switch harness designed to eliminate the modern day radio systems "weak link" problem.

The switch body is a mini I6A heavy duty double pole-double throw mil grad rocker switch capable of caring currents associated with much larger switches. It's designed to endure over 1,000,000 reliable operations at R/C voltages. For convenience, the wire harness is longer than normal and for safety it's encapsulated with mil grad shrink tubing silicone to make it vibration proof. A charge plug is also incorporated and for identification it is shorter than the battery and Rx leads. The rocker knob is white ink stamped (- o) for "on / off" status and has a positive snap action that prevents inadvertent operation. The 22AWG heavy wires and gold pin plugs are rated by ANSI (American National Standards Institute) at 7 continuous amps allowing for a 100% safety factor. The female plug is a Fut. "J" and the male plugs are universal "S" making it compatible with all modern radio systems. Silver plated, self-cleaning thick blade contacts and terminals insure a lifetime of trouble free operation with high current loads. Outside dimensions are 3/4" x 1/2".  It's designed to snap in securely without hardware

The 'SuperRocker' is designed and constructed to exceed the demands of today's advanced radio, power and model technology. In every way it fulfills the needs and expectations of discriminating modeler from 'beginners' t o 'experts'. The 'SuperRocker' carries a full Lifetime Warranty.

Versions

The 'SuperRocker' comes in two versions . . . single and dual-battery. The "dual" version has two charge plugs which are independently "ground"  for simultaneous charging of both packs without the need to disconnect either. All plugs are color coded for easy identification and the 2 charge plugs are shorter in length to eliminate confusion.

---

InvisiSwitch

Description

MAGNETIC ONBOARD Rx COMBO CHARGE/SWITCH

The InvisiSwitch (ISW) is technically a magnetic latching reed switch. It has no external moving parts to wear out and it is unnecessary to physically touch it at anytime. It's designed to be entirely hidden within an R/C model and mounts with double sided tape. Passing the included small magnet by its concealed location activates it "on" or "off". Once latched "on"  it will endure a minimum of 30G's of vibration and 50G's of shock. It's rated for a minimum of 100,000 operations at 5 amps "turn-on" and will take brief 10 amp surges. A flashing red LED indicates status that when active only consumes 1 mA of current. It incorporates a universal "S" male charge plug and Rx plug along with a Futaba "J" female battery plug making it compatible with most popular radios. The "ISW" is hermetically sealed to be completely water and fuel proof. It weighs 14 grams (1/2oz) and measures 2 -¾ x 5/8 x 3/8 inches. The ISW-S1 model is for single battery systems while the ISW-S2 model is for dual battery systems. The activating magnet is referred to as a "key" and any high density magnet can be used.

The InvisiSwitch is designed and constructed to exceed the demands of today's advanced radio, power and model technology. In every way it fulfills the needs and expectations of the discriminating modeler from 'beginners' to 'experts'. The InvisiSwitch carries a full Lifetime Warranty.

LIGHTING SYSTEMS                                     

Micro SunBrites

SunBrites are specifically designed for park flyer sized electric/nitro heli’s & airplanes. The incredibly brilliant micro LEDs are about the size of a hatpin head yet can be seen in the daylight for hundreds of feet and hundreds of yards after sunset. A typical 3 light system only weighs about 2 grams making it ideal for ‘parkflyers’

Current drain is so slight that most Rcers don’t notice a difference in flight time. You have a choice of either a Ruby Red, Diamond White or Sapphire Blue strobing Beacon, adjustable for both flash speed and duration or red ‘Ramping’ Beacon that simulates a Rotating Beacon. Choose either the Heli version kit (small or large) which requires no soldering or the Airplane version kit which also is pre-wired for ‘plug & play’ and includes a hardware package for expansion if necessary and inline connectors for easy wing removal. The airplane version kit can also be used for 30 – 60 size Helis. Operational voltage range is 5 – 15 volts. Systems simply plugs or ‘Y’s” into any Rx slot. Kits range from 3 – 7 LEDs. 

SunBrites make orientation much easier in small Aircraft and brings another dimension of life to your flying experience and also extends your flying day into night. Flying at dusk with SunBrites is awesome!

Once you experience the fun and safety of flying with SunBrite Flight Lights you won’t fly without them.

For as little as 28 bucks you get a million dollar effect!

 

Features

 

• SMT Micro IC Based Controller
• Rugged & Durable
• Exceptionally Brilliant Micro LEDs
• Small & Lightweight (2-3 grams)
• 5-15 vdc Operational Range
• Shock, Vibration, Fuel & Moisture Resistant
• 3 - 7 Light Kits
• Strobe adjustable for Rate & Duration
• 2 Versions Heli & Airplane
• Strobing red, white, blue or Ramping Red Beacon
• RFI Filtered for Noise Free Operation
• Slight current drain almost unnoticeable in flight time
• Heli Version - Requires No Soldering
• Airplane Version Includes expansion hardware package for
  larger airplanes / helis plus inline connectors for easy wing removal
• Plug or ‘Y’ into any Rx slot
• Limited Lifetime Warranty

---

SCALE LIGHTING SYSTEMS                    

Maxi-Lites                                                   Buy 4 Get 1 Free

Custom Designed  Lighting Systems for Airplanes, Helicopters, Vehicles and Watercraft

Specifically tailored to suit your requirements and specs.  Many exclusive features, options and accessories to choose from. 

Available now.  Call or contact Electrotek R/C Customer Supportwith with your requirements for a price quote.   Toll Free 888.567.2862 (USA, Canada & Puerto Rico). Email: support@electrotekrc.com

 

AIRCRAFT NAV LIGHTING KIT

 

Description: The master control unit (MCU) is the heart of the system. All PCB circuitry is protected within a high impact ABS case measuring 2-1/16 x 1-5/16 x 9/16. The basic module has 12 gold pin inputs that individual LED light harnesses and accessories conveniently plug into. The inputs are clearly labeled by name and function. The MCU will handle over 3 dozen Mega Brite LED’s .

 

            Input Function              Input #             LED Color

            Flashing Beacon               #6             Red *(ramping or strobing style)

            Marker Light(s)                  #3             Red / Left side

                                                    #4            Green / Right side

                                                    #5            White / Aft Fuselage or Beacon

            Landing Light(s)                 #2            White

            Anti-Collision Strobe(s)       #9            White (or any color)

            Belly Strobe(s)                   #8            Any color – strobing or ‘ramping’style

            Spot Light or Can              #10           White

            Nav Light Switch                 #7           Remote Tx control

            Landing Light Switch           #1           Remote Tx Control

            Spotlight Switch                #11           Remote Tx Control

            Aux-Power Input                #12           Accessories or additional lights

 

The MCU has 2 (or 3 depending on options) microprocessor controlled flashing circuits for the Beacon, AC & Belly Strobes. The standard Beacon circuitry is strobing style.  *The optional Beacon circuitry is Ramping style – light slowly ‘ramps-up’ to full intensity, quickly fades and re-sequences. All flashing circuits are ‘user friendly’ dual adjustable for rate (speed) & Duty Cycle (on/off duration). The standard AC & Belly Strobe circuit(s) are strobing style. Ramping Belly Strobe is optional.

 

AC & Belly Strobes flash in sync in the Basic MCU. However, optional circuitry allows for non synchronized random flashing for a very realistic and cool effect.

 

The MCU is constructed with precision, State of the Art SMD’s (Surface Mount Devices), built to Mil Spec standards and is Lifetime Warranted.

 

Remote Tx Operation

Nav, Landing and Spotlight circuits are separate which means they can be independently switched remotely from the Tx by choosing any of the available switch options

 

Switches Available

-           Single Op. Micro Switch – Plugs into any spare Tx channel slot to control 1 switchable circuit

-           Dual Op. Micro Switch – Plugs into any spare Tx Channel slot controlled by a Rotary or 3 position Toggle Switch on the Tx. This will allow both NAV & Landing Lights to be switched independently using only 1 Tx slot.

-           IR Switch – Adjustable Infra Red Light Sensing switch automatically controls NAV Lights on/off function according to ambient light condition set for. 

 

 

 

Accessory Power

Input number 12 will supply power to one or more accessory modules available such as Interior Lighting, Panel Lighting, etc or additional LED Light Harness or Light Strings.

 

LED LIGHT HARNESSES

All Harnesses are complete and ready to plug into the appropriate MCU Input. Lead lengths are according to model size and include routing. Also included are LED protective, light disbursing appropriately colored Lens Caps. Chromed Metal Reflectors are included for Landing & Spot Lights.

 

Quality

LEDs are rated for quality and assorted into 10 numbered bins. Each bin contains identical LEDs that have been matched for color purity, clarity, brilliance and wavelength. Number 10 bin is the very best (and most expensive). Commercially made lighting kits often consist of lower bin numbered LEDs because they are much less expensive. ERC kits use only #10 bin quality. Two sizes are available – 5mm or 3mm. Select all LED harnesses to be either 5mm or 3mm or mix & match both. Choose either 26AWG or 32AWG micro wire.

 

Visibility factor:

            Daylight        5mm = 500ft              3mm = 200ft

            Nighttime      5mm = 3,000yards     3mm = 1,000yards

LEDs draw only 1/10^th the current of incandescent lights. They glow cool and have a life expectancy of 100,000 hrs. 

 

INSTALLATION      

Each kit also includes a complete hardware package for installation & mods, if necessary.

 

Hardware Package Contents:

            Extra wire & 2 sizes shrink tubing

            Servo Tape & Hook & Loop

            Extra Switch jumpers

            Extra Lens Caps

            Alternate LED mounting clips

            Inline Connectors

 

POWER SUPPLY   

Because of LOW current drain, Maxi-Lites can be plugged into any spare Rx slot or Y’d into any used slot. If preferred use an auxiliary pack with a Charge/Switch Harness. Power supply can range from 4.8 to 7.4vdc. You can also, on request, have the system designed to operate on power supplies of up to 22.2vdc.

 

The ERC Maxi-Lites kits are constructed of individual components, which allows for a variety of options, switches, effects and configurations. The main advantage of this is that you are actually constructing your own customized system, built to your exact specs and operational needs. Your system will come to you complete and ready to ‘drop in’. A comprehensive ‘User’s Guide’ is included. If the system is for a specific model Heli or Airplane a photo is usually included with details on configuration and dimensions. Each kit is carefully handcrafted over an 8-12 hour period and entirely made in the U.S.A.  

Before shipping, a Maxi-Lites kit is temporarily assembled and undergoes a 48hr ‘burn-in’ test procedure for quality assurance of component integrity and operational functionality.

 

Your Satisfaction is our #1 Priority and is Guaranteed.

           

HOW TO BEGIN     

 

1. Begin constructing your system by selecting an MCU version designed for either a Helicopter of Airplane – the difference is that the Airplane version has inline connectors built into all wing lighting harnesses for easy ‘breakdown’. 

 

2. Select circuitry options either individually or by the popular options combo package.

 

3. Decide if you want remote Tx operation for one or more of the switchable circuits – NAV, Landing, Spot Light. Then select your Switch options.

 

4. Select the necessary Light Harnesses from the list, specify the color of lights, number, size, lead length & wire gauge (AWG) on each individual harness. Allow extra wire on length for routing room. 

 

Price List

 

MCU (Master Control Unit)

 

Airplane                                                                         $109.95

If w/Wing Mount Strobes –                 Add On               $    5.00 

If w/Wing Mount Landing Lights –       Add On               $    5.00

 

Helicopter                                                                     $  99.95

 

                     Circuitry Options

 

 

Ramping Beacon Circuit                                                   $   8.95

 

Strobing Beacon Circuit                                                       N/C

                       

Ramping Belly Strobe                                                      $    6.00

                                   

Strobe(s) Circuit – 1 Circuit for inputs

8 & 9 AC & Belly Strobes                                                 $  18.00

                       

Belly Strobe - Strobing Style Flashing                                                                               

in Sync w/AC Strobe(s) #9 input                  N/C

                                                

 

Belly Strobe - Strobing Style                                                                                   

                         Flashing Non Sync   w/ACS

                          Separate Circuit on #8 input                     $  23.00

                                                                                   

 

Belly Strobe - Ramping Style                     

 Flashing Non Sync   w/ACS

 Separate Circuit                                       $ 31.95

 

AC & Belly Strobe(s) Multi-Flash                                        $ 39.95

Sequencing in Sync

for #8 & 9 inputs

 

           

 

Circuitry Options - Standard Package #1

                    (most Popular)

 

Ramping Beacon Circuit                                                     $   8.95                                   

AC Strobe(s) Circuit                                                           $ 18.00                       

Belly Strobe - Strobing Style                                                                                   

                         Flashing Non Sync w/ACS                                                                         

 Separate Circuit input #8 & 9                     $ 23.00                       

Circuitry Options if                                                                           

Purchased individually                                                        $ 49.95

 

Circuitry Options if   

Purchased as a Package #1                                            $  39.95

                                                                                               

SAVINGS                                                          $10.00  

 

  

Circuitry Options - Package #2

                       

Ramping Beacon Circuit                                                    $    8.95                       

AC Strobe(s) Circuit                                                          $   18.00

Belly Strobe - Ramping Style                     

 Flashing Non Sync w/ACS 

 Separate Circuit inputs #8 & 9                  $    32.00

 

Circuitry Options if                                                                           

Purchased individually                                                        $  58.95

 

Circuitry Options if   

Purchased as a Package #2                                            $  47.95

                                                                                               

SAVINGS                                                          $11.00  

 

 

Circuitry Options - Package #3

 

Ramping Beacon                                                                  $    8.95

AC & Belly Strobe(s) Multi-Flash

Sequencing in Sync                                                             $   43.00

 

Circuitry Options if                                                                           

Purchased individually                                                          $   51.95

 

Circuitry Options if   

Purchased as a Package #3                                               $   41.95

                                                                                               

SAVINGS                                                         $   10.00  

 

  

Circuitry Options - Package #4

 

Ramping Beacon                                                                  $     8.95

AC Belly Strobes(s) Multi-Flash                                         

Sequencing Non Sync inputs #8 & 9                                      $   43.00

 

Ramping Belly Strobe in Sync

with Ramping Beacon                                                           $     6.00

 

Circuitry Options if                                                                           

Purchased individually                                                           $   57.95

 

Circuitry Options if   

Purchased as a Package #4                                               $   45.95

SAVINGS                                                          $ 12.00  

 

                                   

 

Switch Options

 

Single OP Micro Switch – controls 1 circuit

remotely from Tx via 1 free Rx slot                                          $  39.95

 

Dual OP Micro Switch – independently controls

NAV and Land Lights remotely from Tx via 1 free

Rx slot controlled by either a Rotary Style or 3

position Toggle Tx Switch                                                      $  49.95

 

 

IR Switch (Infra Red) – Adjustable automatic

ambient light sensor switch controls NAV Lights

on/off function                                                                       $  38.95

LED Light Harnesses        5mm / 3mm

                                        26 or 32AWG Micro Wire

            Red/Amber                                                               $   7.75

            White/Green/Blue                                                      $   9.95

 

 

 

 

 

*For availability and pricing of accessory modules please call 888-567-2862 or email i nfo@electrotekrc.com

 

 

To order contact ERC :        Telephone                  888.567.2862

                                                Email                    orders@electrotekrc.com

                                                Fax                     530.873.4729

 

We ship UPS Ground unless otherwise specified. All major bank debit & credit cards and Pay Pal are accepted. Order normally will be shipped within one business week following order confirmation.      

 

ORDER FORM  

 

 

---

 

LIMITED LIFETIME WARRANTY

GEM 2000 products are warranted to be free from defects in material and workmanship for the lifetime of the original purchaser. If this product becomes defective, return it along with $5.00 for shipping & handling to Electrotek R/C and it will be repaired or replaced at no additional charge for material or labor. Electrotek R/C is not responsible for damages or injuries that may result from exceeding its stated application ratings. In the event this product becomes defective from misuse on the abuse of its intended application for R/C models, this warranty shall become null and void.