Switches

SuperRocker

SuperRocker

Model Type: All Nitro/Gas Powered RC Aircraft, Helicopters, Vehicles, Marine Craft

Power: 16 amps at 8vdc Turn-On; 16 amps at 110 to 250vac Turn-On

LEDs: Optional on/off visual indicator in flashing red or red/blue on Single and Dual versions

Connector: Male: Universal "S" (Jr/Hitec); Female: Futaba J; Optional Dean's "Ultra Plug" connectors

Wire Gauge: 22 AWG or 18 AWG Silicone

Usage: DPDT Heavy Duty combination Charge/Switch Harness. Can be used to switch any load up to 16 amps. Although it can be used in any Nitro/Gas model, its main design application is for the more expensive airplanes and helicopters where switch failures become unacceptable and expensive. more...

Description: The SuperRocker is a mil grade mini Double Pole/Double Throw rocker-style switch capable of carrying currents associated with much larger switches. The rocker knob has white ink stamped logic symbols (I/0) to indicate on/off status. more...

More Info: It is a well-known fact that the notorious "weak link" in the RC system is the "on/off" switch. Countless crashes continue to occur from this culprit. That's why there are so many after market so-called "Heavy Duty" switches on the market. Unfortunately, more...

Resources: Photos, Tech Manual
purchase SuperRocker Switch

InvisiSwitch

InvisiSwitch

Model Type: Scale Aircraft, Helicopters, Seaplanes, Boats, Submarines and various classes of racing boats

Power: 25 Watts Maximum

LEDs: Flashing Red or Flashing Red/Blue

Connector: Male: Universal "S" (Jr/Hitec); Female: Futaba J

Wire Gauge: 22 AWG Heavy Duty

Usage: This is a completely waterproof switch, uniquely designed to be tucked away inside a model where it cannot be seen. Ideal for scale model applications where a normal RC switch would likely detract from the scale appearance. more...

Description: This is a magnetically activated hermetically sealed latching reed switch that will handle a continuous load of up to 25 watts with brief surges to 50 watts. To determine watts, more...

More Info: When installing a radio system in a scale aircraft or water related model, a conventional RC switch is usually undesirable and/or impractical. With that in mind, we set about the task of developing an RC Charge Switch that would more...

Resources: Tech Manual
purchase InvisiSwitch

SmartSwitch (SSW)

SmartSwitch

Model Type: Airplanes, Jets, Helicopters, Vehicles, Marine Craft

Voltage Range: 4-15vdc

LEDs: None

Connector: Dean's gold 2 pin on power and relay leads or JR/Hitec if requested

Style: ABS enclosed case 1 1/8" x 7/8" x 1/4" or waterproof open-faced PCB measuring approx. 1" x 2"

Usage: Automatically controls ERC scale lighting system's on/off operation according to the ambient lighting conditions with switching inputs.

Description: The SmartSwitch is an Infra-red light sensing switch designed to be User programmable over a wide range from full sunlight to total darkness including an always "on" or "off" setting. Plugs into any ERC scale lighting system's switch input. Completely protected by more...

More Info: The SmartSwitch works just like the automatic light dimmer in an automobile. A waterclear IR phototransistor continually monitors the ambient lighting conditions and reacts to turn a light circuit either on or off. EXAMPLE: You can program the SmartSwitch to more...

purchase SmartSwitch

DigiSwitch-S (DSWS)

Model Type: Airplanes, Jets, Helicopters, Vehicles, Marine Craft

Voltage Range: 4-15v, 5 amps max

LEDs: Two Indicators - 1 Pilot and 1 Programming

Connector: One JR/Hitec (Universal "S"), one Dean's 2 pin gold, one pigtailed output lead requiring a plug compatible with accessory that is to be supplied with on/off controller RX power

Style: High impact ABS case or plastisized rubber dip or mil grade shrink wrap

Usage: Digital electronic switch designed for TX remote control of any ONE RC accessory up to 15vdc and 3A max input. Specifically designed for ERC switchable lighting systems control inputs.

Description: The DigiSwitch-S is a single operation, micro-processor based electronic control switch. It's quite versatile and can be used for a variety of control applications where remote TX on/off operation of an RC accessory or lighting kit is desired. LEDs indicate power status and programming set points. Programming is user friendly, i.e., no computer necessary.

More Info: All PCB circuitry is protected by a waterproof coating and enclosed in a high impact ABS case. If requested, plastisized rubber or mil grade shrink will be substituted for the ABS case. The PCB is compact and measures approximately 1" x 2". It will easily fit into small RC more...

purchase DigiSwitch

DigiSwitch D dual

DigiSwitch-D (DSWD)

Model Type: Airplanes, Jets, Helicopters, Vehicles, Marine Craft

Voltage Range: 4-15v, 1.2 amp max

LEDs: Three Indicators - 1 Pilot and 2 Independent Programming

Connector: One JR/Hitec (Universal "S"), two Dean's 2 pin gold

Style: High impact ABS case or plastisized rubber dip or mil grade shrink wrap

Usage: Digital electronic switch designed for TX remote control of TWO separate RC accessories up to 15vdc and 3A max input. Specifically designed for ERC lighting kits to independently control two separate switchable circuits using only one RX channel slot.

Description: The DigiSwitch-D is a dual operation micro-processor based electronic control switch. It has been specifically designed to be used with ERC scale lighting kits with multiple switching inputs such as independent nav and landing light circuits for airplanes, jets and helicopters. Three 3mm LEDs indicate the power on/off status and the two individual circuit set points. The DSWD is user friendly and does not require connection to a computer for programming.

More Info: There are two models of the ERC DigiSwitch indicated by the suffix S or D. The letters represent Single & Dual Operation. The 'D' model has two relay type outputs designed to make or break either the positive or negative rail of a circuit. The PCB is open faced and it's circuitry is more...

purchase DigiSwitch

MicroSwitch-S (MSWS)

Model Type: Airplanes, Jets, Helicopters, Vehicles, Marine Craft

Voltage Range: 4-8vdc

LEDs: None

Connector: One JR/Hitec (Universal "S"), one Dean's 2 pin gold

Style: Single Micro snap lever switch integrated with Micro Servo

Usage: Substitutes for the digital electronic single operation switch used to control an ERC lighting system's on/off function. Not as versatile as its high tech digital cousin, but more economical.

Description: This switch consists of a snap lever switch that's been integrated with a name brand high quality micro servo which is plugged into any free RX channel slot. When the appropriate TX switch is activated, the transmitted signal causes the servo's control horn to engage the switch for remote on/off operation of the selected switchable circuit in an ERC scale lighting kit. The MSWS is specifically designed for relay make/break type of circuitry.

More Info: A miniature snap lever switch integrated with a micro servo has a threaded brass "ball stud" screwed into the end of the servo horn. The stud is adjusted so that when it passes over the lever of the snap switch that's attached to the side of the servo it more...

purchase MicroSwitch

MicroSwitch-D (MSWD)

Model Type: Airplanes, Jets, Helicopters, Vehicles, Marine Craft

Voltage Range: 4-8vdc

LEDs: None

Connector: One JR/Hitec (Universal "S"), two Dean's 2 pin gold

Style: Single Micro snap lever switch integrated with Micro Servo

Usage: Substitutes for the digital electronic dual operation switch used to control two individual switchable circuits of an ERC lighting system.

Description: This switch consists of two snap lever switches that have been integrated with a name brand high quality micro servo which is plugged into any free RX channel slot. This design allows a single free RX channel slot to control two individual circuits in a lighting system.

More Info: When the appropriate TX switch is activated, it causes the servo's control horn to engage the two snap lever switches in succession for remote on/off operation of the selected switchable circuits in an ERC Nav Lighting kit. The advantage of this design is more...

purchase MicroSwitch

Ready to order?

Call Electrotek RC seven days a week at (530) 873-6230

Email orders 24/7

Shop the ERC Store or use Purchase buttons for more options

USPS Priority on orders of $100+

 

View details and other specials...